How to Replace a Shower Cartridge

Ask This Old House plumbing and heating expert Richard Trethewey travels to Seattle to help a homeowner whose shower runs cold whenever there’s a demand for hot water elsewhere in the house Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse Cost: $30 Skill Level: Beginner Tools List for Replacing a Shower Cartridge: Flathead screwdriver Cartridge removal tool Caulking gun Shopping List: Replacement cartridge Grease Silicone caulking Foam bead Steps: 1. These instructions apply to the earliest models of single handle shower valves. Follow manufacturer’s instructions for your specific style of valve. 2. Start by removing the handle of the shower. There’s usually a cover plate that can be pried off with a flathead screwdriver. Then, hold the handle tight and unscrew the screw behind the cover plate with the same screwdriver. 3. Remove the escutcheon plate by unscrewing it. 4. Look to see if there’s a water shut off near the shower valve. If not, shut the water off at the main water supply line. 5. There’s a small clip holding the cartridge in the shower valve. Carefully pry that up. 6. Use a cartridge removal tool to carefully work the old cartridge back and forth until it can be safely remove from the wall. The cartridge removal tool may be included with the replacement cartridge. 7. Once the cartridge is loose, use a pair of pliers to carefully pull it out of the wall. Don’t force it out. If it gets damaged while being removed, it could destroy the whole valve and then the entire thing will need to be replaced. 8. Put some grease on the replacement cartridge and carefully work it back into the valve. 9. Put the small clip back in to hold the new cartridge in place. 10. Add a bead of silicone and a foam bead around the back of the escutcheon plate to make a watertight seal. 11. Screw the cover plate and the shower handle back into place. 12. Turn the water back on. Resources: Depending on which company manufactured the valve, there may be some variations to how the valve cartridge is replaced. This homeowner had a Moen valve and the replacement parts were manufactured by Moen (https://www.moen.com/). They can be found at most home centers and plumbing supply stores. They sometimes come with a cartridge removal tool, so it helps to get the replacement cartridge before starting the work. The screwdriver and pliers Richard used can be found at home centers. Ask This Old House TV Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.   This Old House releases new segments every Sunday, Monday, Wednesday and Friday.   Keywords: This Old House, How-to, home improvement, DIY, ask this old house, richard trethewey, plumbing, shower, valve Watch the full episode: https://ift.tt/2JHDmJm Follow This Old House and Ask This Old House: Facebook: https://ift.tt/1psm4fC Twitter: https://twitter.com/thisoldhouse https://twitter.com/asktoh Pinterest: https://ift.tt/1psm4fE G+: https://ift.tt/1CtsNjJ Instagram: https://ift.tt/1psm1QZ Tumblr: https://ift.tt/1CtsLbH