How to Hang a Porch Swing through Vinyl

Ask This Old House general contractor Tom Silva adds structure to a porch in order to safely hang a swing Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse Time: 3-4 hours Cost: $200 Skill Level: Moderate Tools List for Hanging a Porch Swing: Hammer [https://amzn.to/2JmGkEY] Prybar [https://amzn.to/2V9dVnU] Wrench [https://amzn.to/2LvSduP] Drill [https://amzn.to/302tbH0] Shopping List: Porch swing [https://amzn.to/2Yc7LFC] 2x4” boards [https://amzn.to/2WwmWJo] Lag screws [https://amzn.to/2WvBJE6] Wood screws [https://amzn.to/2H3m60f] Thick drill bit [https://amzn.to/2JotRk7] Thin drill bit [https://amzn.to/2VSntYV] Steps: 1. Start by removing the vinyl ceiling using a hammer and a prybar up until the furthest point the swing will hang. 2. If the swing cannot be hung on structure, structure will need to be added. Cut the 2x4” to size and then hammer it into position, preferably over the furring strip (if there is one) to accommodate the additional ¾” depth it creates. Secure the structure with wood screws. 3. Reinstall the vinyl ceiling up until the panels fall just over the added structure. 4. Drill a pilot hole through the vinyl, the furring strip, and the added structure using the drill and a drill bit. To keep the vinyl from cracking, it helps to start with a thicker drill bit just for the vinyl, then switch to the thin drill bit to drill the rest of the hole. 5. Mount the bracket that comes with the swing to the pilot holes. Hand tighten the bracket through the pilot hole using a lag screw and a wrench. 6. Install the vinyl ceiling up until the next location for the other side of the swing and repeat the process. 7. Install the rest of the vinyl ceiling. 8. Hang the swing onto the mounting brackets. Resources: Depending on which direction you’d like to hang the porch swing, additional structure may need to be added to ensure the swing is installed safely. To add structure, Tom took a piece of 2x4” and hammered it into place. He then secured it with wood screws. To secure the brackets from the swing, Tom used lag screws. All of these tools and hardware can be found at home centers. The swing the homeowners had picked out was the Coral Coast Casco Bay Resin Wicker Porch Swing with Optional Cushion, which comes from Hayneedle (https://amzn.to/2Yc7LFC). The swing comes with the green hanging brackets, but does not come with hardware to attach the brackets to the ceiling. Ask This Old House TV Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook. This Old House releases new segments every Sunday, Monday, Wednesday and Friday. Keywords: This Old House, How-to, home improvement, DIY, ask this old house, tom silva, porch swing, vinyl siding, porch, install Watch the full episode: http://bit.ly/2YnRddK Follow This Old House and Ask This Old House: Facebook: http://bit.ly/1psm4fC Twitter: https://twitter.com/thisoldhouse https://twitter.com/asktoh Pinterest: http://bit.ly/1psm4fE G+: http://bit.ly/1CtsNjJ Instagram: http://bit.ly/1psm1QZ Tumblr: http://bit.ly/1CtsLbH