How to Prepare Home for Potbellied Pig | Pet Pigs

Oink Oink! Perfect Pig Products: Pot Bellies and Other Miniature Pigs (Complete Pet Owner's Manuals): http://amzn.to/1JVs370 Storey's Guide to Raising Pigs: Care, Facilities, Management, Breed: http://amzn.to/1N2blY4 Potbellied Pig Behavior and Training: http://amzn.to/1GyKkXt Teacup Pigs and Micro Pigs, the Complete Owner's Guide Paperback: http://amzn.to/1jdOLl2 I Like Pig Butts and I Cannot Lie T-Shirt: http://amzn.to/1QbAxMG Watch more How to Take Care of a Pet Pig videos: http://ift.tt/2zGJxYZ When you get a potbelly pig, you better have your home all prepared before you bring it home. You need a space for the pig. The space should be, if it’s a youngster, a very small area; maybe four feet by eight feet is a small area where it has a litter box, a bed area, preferably a bed, like a crate, that’s covered. It can even be a corrugated box upside down with the door carved into it and lots of blankets inside of it so that it can get away and likes to be in these little spaces. That’s when you first bring a pig home. There are also outside area. You need to make sure your yard is secure, that there is fencing or some kind of containment for them; outside pen area. It should be made by the time that they are a year old. The pen area needs to be a secured fencing; it needs to have a little doghouse of some kind in there. It needs to have a pool for water source so that they can cool their selves down in the summer time. They need shade in their outside space, they need water. That’s about it for the outside area. That outside area should not be situated under any kind of trees that would be producing food or nuts; they don’t need any more food. You want to be securing your cabinets and you want to make sure that below the countertops there is no food sources. This eliminates the pig getting into things, and all the food is putting up so that it will not get into things. Pigs are very food motivated and we don’t want them to get any food that isn’t good for them. In your other areas of the house, you should have no clutter. If you have clutter around, magazine, video tapes, that type of thing, they all need to be picked up so that they don’t get into anything. They are curious about things and their nesters, so they will get into magazines and root them up, that type of thing, so be careful of your homework. When preparing your home, you should realize that pigs should not do stairs. Some of them are capable of doing stairs but they shouldn’t be doing them. You want to ramp areas that they have to maneuver, so like a porch going out to the backyard; you need a ramp. If you have an upstairs, don’t worry about the pig going up there, he should stay on the first floor.

TOH: Trade School- Exclusive Preview of Raised Vegetable Beds!

General contractor Tom Silva tops off the existing cellulose insulation in the walls of the oldest part of the house. Landscape contractor Roger Cook takes homeowner Becky Titlow to see a display of “garden to table” raised beds at Elm Bank Reservation in Wellesley, MA. Then, back at the house, landscape designer Jenn Nawada lends a hand as Roger builds our raised beds out of fieldstone from the old foundation, and Becky plants the first vegetables for her family. On the roof of the new addition, Tom shows host Kevin O’Connor how he’s using a self-sealing membrane on the low sloop roof, and at the drip edge, to properly waterproof the roof.

How to Replace a Garage Door Opener

Watch the full episode: http://ift.tt/2zFPBRm Ask This Old House master electrician Scott Caron replaces an old garage door opener with a smart opener. Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse Time: 3-4 hours Cost: $350 Skill Level: Moderate Tools List for Replacing a Garage Door Opener: Flathead screwdriver Open ended adjustable wrench Screw gun Shopping List: Smart garage door opener and accessories Plastic conduit Steps: 1. Turn the power off to the garage at the circuit panel. 2. Unplug the existing garage door opener. Loosen the brackets securing it to the ceiling and gently lower it down. 3. Use the open ended adjustable wrench to loosen the bracket and remove the bracket on the door and the bracket above the door. 4. Install the bracket that comes with the garage door opener over the garage door using the screw gun. 5. Slide the track into the bracket and secure with the wrench. 6. Screw the new motor into the existing brackets in the ceiling using the wrench. 7. Connect the lifting arm from the door to the track. 8. Wire the keypad into the wall on the inside of the garage. 9. Run the wire through a conduit and connect it to the garage door opener motor. 10. On the outside of the garage, mount the wireless keypad using the screw gun. 11. Mount the electric eyes about 6” from the floor on the inside of the garage. 12. Plug the motor into an outlet and turn the power back on. Resources: Scott installed the Ryobi Ultra-Quiet Garage Door Opener (http://ift.tt/1MUqDQ4). In the workshop, he showed some optional accessories including a fan, speaker, and extension cord that can all dock into the opener. Both the motor and accessories can be found at home centers. Everything else Scott used to install the garage door opener, including the pliers and the drill, are available at home centers. Follow This Old House and Ask This Old House: Facebook: http://ift.tt/1psm4fC Twitter: https://twitter.com/thisoldhouse https://twitter.com/asktoh Pinterest: http://ift.tt/1psm4fE G+: http://ift.tt/1CtsNjJ Instagram: http://ift.tt/1psm1QZ Tumblr: http://ift.tt/1CtsLbH

How to Cut Down a Dangerous Tree

Watch the full episode: http://ift.tt/2zFPBRm Ask This Old House landscape contractor Roger Cook cuts down a tree that’s leaning dangerously towards a house. Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse Time: 4 hours Cost: $1,000 and up Skill Level: Expert Tools List for Cutting Down a Dangerous Tree: Bucket truck Chainsaw Hard hat Safety Glasses Gloves Ear protection Harness Chaps Wood chipper Shopping List: Rope Steps: 1. Removing a large tree with a dangerous lean is only recommended for a certified arborist with the correct tools and safety equipment. 2. Put on all safety gear and use a bucket truck to reach the highest point in the tree. 3. Use the chainsaw to cut off the smaller branches. 4. Put the smaller branches into a wood chipper. 5. Once the small branches are out of the way, wrap a rope around the tree, and then tie off sections of the large branches one at a time. Cut the large branches and use the rope to safely guide them towards the ground. 6. Once all the branches have been removed, cut the trunk in small sections and push them safely to the ground. Towards the top of the tree, the sections can be 3’-4’, but as you get closer to the ground, cut the sections about 16”-18”. 7. Once the tree has been cut down to a manageable size, tie the rope from the top of the tree to the base of something else in the direction the tree should fall. 8. Cut a wedge section out of about ⅓ of the base of the tree in the direction the tree should fall. 9. Cut straight back into the tree from the other side of the wedge and the tree should fall. 10. Buck the trunk into 16”-18” pieces that can be used for firewood. Only cut about ⅔” down, then rotate the trunk and cut from the other side to avoid damaging the chainsaw. Resources: For a tree this large that’s leaning, hiring a certified arborist to remove it is recommended. Expert assistance for this segment was provided by Peter F. McBride Tree Service (http://ift.tt/2iQAixq) Follow This Old House and Ask This Old House: Facebook: http://ift.tt/1psm4fC Twitter: https://twitter.com/thisoldhouse https://twitter.com/asktoh Pinterest: http://ift.tt/1psm4fE G+: http://ift.tt/1CtsNjJ Instagram: http://ift.tt/1psm1QZ Tumblr: http://ift.tt/1CtsLbH

How to Choose the Right Water Filter

Watch the full episode: http://ift.tt/2zFPBRm Ask This Old House plumbing and heating expert Richard Trethewey explains how to choose the right water filter for different water quality issues. Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse Time: at least 1 hour Cost: $20-$1000 Skill Level: Beginner Shopping List: Water quality test kit Water filter Steps: 1. Purchase a water quality home test kit. 2. Follow the instructions on the kit and wait for results on water quality issues. 3. Based on the results of the test, choose a filter that will treat the water quality issue. Resources: All the filters Richard demonstrated, including the granular activated carbon filters, sink mounted filters, sediment filters, and water softeners can be purchased at a home center or plumbing supply store. Expert assistance for this segment was provided by Morris Merchants (http://ift.tt/2y9tSmc) Follow This Old House and Ask This Old House: Facebook: http://ift.tt/1psm4fC Twitter: https://twitter.com/thisoldhouse https://twitter.com/asktoh Pinterest: http://ift.tt/1psm4fE G+: http://ift.tt/1CtsNjJ Instagram: http://ift.tt/1psm1QZ Tumblr: http://ift.tt/1CtsLbH

How to Choose a Stud Finder

Watch the full episode: http://ift.tt/2zFPBRm Ask This Old House general contractor Tom Silva demonstrates different ways to locate studs in a wall. Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse Time: 5 minutes Cost: $5-50 Skill Level: Beginner Tools List for Choosing a Stud Finder: Magnetic stud finder Digital stud finders Drill Flathead screwdriver Steps: 1. There are several ways to locate studs in the wall- both low tech and high tech. 2. Use your knuckle against the wall to feel for a stud. If you hit a stud, the knock will feel more solid and sound slightly higher pitched. 3. Look for clues in the wall. Look for patched nail holes in baseboard trim, chair rails, or crown molding, since the trim was probably nailed to the studs. Use a small drill bit just above the baseboard to see if there’s a stud behind the wall or not. 4. Turn off the power at the electrical panel and check next to an outlet or light switch. Unscrew the cover plate and slide the screwdriver along the sides of the electrical box to see where it was mounted. Once that stud has been located, measure 16” or 24” on center from the stud to identify subsequent studs. 5. Purchase a magnetic stud finder. Slide it along the wall up and down and it will stick to any nails or screws that attach the drywall to the studs. 6. Purchase a digital stud finder. Slide it along the wall and the light will indicate when a stud has been located. 7. Another digital stud finder can indicate the width of a stud. Slide it along the wall and the lights will indicate stud location and width. Resources: The magnetic stud finder Tom used is the StudBuddy (http://ift.tt/2iQAdd6). The electronic stud finder that can show the width of a stud is the ProFinder 5000+, manufactured by Franklin Sensors (http://ift.tt/2zD2qvP). The electronic stud finder that can show pipes and wires hidden in a wall is manufactured by Zircon (http://www.zircon.com). Follow This Old House and Ask This Old House: Facebook: http://ift.tt/1psm4fC Twitter: https://twitter.com/thisoldhouse https://twitter.com/asktoh Pinterest: http://ift.tt/1psm4fE G+: http://ift.tt/1CtsNjJ Instagram: http://ift.tt/1psm1QZ Tumblr: http://ift.tt/1CtsLbH

Is Sarcasm Ever OK When Teaching? | Classroom Management

Need more resources for molding young minds? THE Classroom Management Book: http://amzn.to/1FXoDpb Setting Limits in the Classroom: http://amzn.to/1Pj0iMN Classroom Management: Real-World, Time-Tested Techniques: http://amzn.to/1Q8s4JV The Social--Emotional Learning Approach Children Deserve: http://amzn.to/1L0l6p3 Classroom Management for Elementary Teachers: http://amzn.to/1FTGdKQ Watch more Classroom Management Strategies videos: http://ift.tt/2iKozjW Is sarcasm ever okay in the classroom? I'm going to go with no; it's not okay in the classroom. I know a lot of us communicate with sarcasm and we think it's witty or it's funny or it's creating rapport with the students, but the truth is sarcasm always has within it a bite, it's always meant to inflict a little bit of uh at that person that it's directed at. We never know how that bite is going to land on the student who is the recipient of the sarcastic remark and when I started teaching a used a lot of sarcasm in the classroom, I was a relatively sarcastic person, and I relied on it for humor. When I was teaching high school I thought it was okay, my kids could handle it, but eventually I said just the wrong thing to just the wrong person at just the wrong time, and that student was so deeply offended that he cut my class for a week afterwards. We never know how it's landing with a student, so it's always better to error on the side of what it's best for students, and what is best for students is genuine communication with them from the heart and not from a place of sarcasm. That doesn't mean that we can’t be having fun with our students or being witty, but there's a difference between wit and sarcasm. Wit doesn't necessarily intend to harm, whereas sarcasm always has that intention behind it on some level even if it's not malicious on some level. So, to be safe I would say no sarcasm in the classroom.