Monday, 4 February 2019

Gordon Ramsay Demonstrates How To Flambé


Add The F Word on Facebook: http://bit.ly/1KOqboh... To find out more about Gordon Ramsay visit: http://bit.ly/MNlxUn Gordon Ramsay on Facebook http://bit.ly/JnOoCj Follow Gordon Ramsay on Twitter

Sunday, 3 February 2019

How to Upgrade to Soft-Close Cabinets


Ask This Old House carpenter Nathan Gilbert upgrades a kitchen to have soft close cabinets Time: 3-4 hours Cost: $1500 for the entire kitchen Skill Level: Beginner Tools List for Upgrading Soft Close Cabinets: Screwdriver Drill Self-centering drill bit Draw slides jig Shopping List: Soft close hinges Soft close drawer slides Drawer slides socket Wood screws Steps: 1. Using the screwdriver, unscrew the hinges holding the cabinet doors to the cabinet and remove the doors. Only do one door at a time so you don’t lose track of which door goes where. 2. Unscrew the hinges from the cabinet doors using the screwdriver. 3. Place the new hinges into the mortises from the old hinges. If the new screw holes don’t line up, you’ll need to drill new ones. 4. To drill new holes in the cabinet doors, take a combination square to line up the hinge with the bottom of the door to ensure it’s square. 5. Next, drill a small hole in the door using a self-centering drill bit. 6. Then, screw the new hinges into the new holes. 7. Reinstall the cabinet door onto the cabinet and repeat this process for every cabinet door in the kitchen. 8. For the drawer slides, start by removing the drawers and slides from the cabinet using the screwdriver. Do one cabinet at a time, and keep track of the order of the drawers being pulled from that one cabinet, as they can still vary in size. However, it will be easier to work in the cabinet with all the drawers removed. 9. Pull apart the new slides to work only with the section that will be mounted to the inside of the cabinet. 10. Mount the drawer slides jig into the inside of the cabinet. 11. Insert the back of the slides into the socket and rest the slides on the jig. Put the slides into position and screw the socket against the back of the cabinet. 12. Screw the front of the slides into the face frame of the cabinet. 13. Reconnect the slides and repeat this process for both sides of the drawer. 14. Switch the drawer slides jig so that it is sticking outside of the cabinet. Rest the drawer on the jig and extend the drawer slides until they are fully extended to the front edges of the drawer. 15. Screw the slides into the drawer. 16. Repeat this process for all the drawers in the kitchen. Resources: While there are a few low-cost options to upgrade to soft close kitchen cabinets, Nathan suggests changing out all hardware to soft close… Nathan installed TEC Soft-Close cabinet hinges, which are manufactured by Grass USA (http://bit.ly/2MLM36N). He recommends identifying the brand currently installed in the cabinets and replacing the hardware with that same brand, which is what he did in this case. Usually, that will require less work to the cabinet doors to get the new hardware to fit. For the drawer slides, Nathan installed 22” soft-close, full extension, ball bearing, side mount drawer slides, which are manufactured by Everbilt and sold at home centers. The plastic cup Nathan mounted to the back of the cabinet was manufactured by Everbilt as well. To determine which types of slides to get, measure the cabinet front to back for the length, and get the same mounting type as the original slides, since they will be easier to install. Opt for full extension over 3/4 extension to gain full access of the drawer. The drawer slides jig Nathan used is manufactured by Kreg Tools (http://bit.ly/1CCEfcw). The jig makes the drawer slides installation significantly easier because they can hold everything in place. The rest of the tools Nathan used to install the soft close hinges and slides, including the drill driver, screwdriver, and self-centering drill bit, can all be found at home centers. Expert assistance with this segment was provided by Nathan Gilbert Carpentry. http://bit.ly/2MLM4aR

Home Inspection Nightmares I Dangerous Deck


Ask This Old House host Kevin O’Connor, plumbing and heating expert Richard Trethewey, general contractor Tom Silva, and mason Mark McCullough share some wild code violations submitted to them by home inspectors. Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse In This Video: 1. Tom starts with a deck that’s barely supported by anything. Submitted by Jim in Alaska. 2. Mark shows a concrete front step with a little wooden step attached to the top of it to clear the riser requirements. Submitted by David in Rhode Island. 3. Richard shows a wine cork that has been stuffed into a pipe to stop a leak. Submitted by Jim in Cleveland. 4. Show us YOUR Home Inspection Nightmares! Upload a photo here (http://bit.ly/2DSC0Kr). Resources: Expert assistance with this segment was provided by the American Society of Home Inspectors (ASHI) (http://bit.ly/2eGiVNw). Ask This Old House TV Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook. This Old House releases new segments every Sunday, Monday, Wednesday and Friday. Keywords: This Old House, How-to, home improvement, DIY, tom silva, ask this old house, home inspection nightmares, kevin o'connor, richard trethewey, mark mccullough, decks, code Watch the full episode: [link to full ep on YT if avail, or on .com if unavail on YT] Follow This Old House and Ask This Old House: Facebook: http://bit.ly/1psm4fC Twitter: https://twitter.com/thisoldhouse https://twitter.com/asktoh Pinterest: http://bit.ly/1psm4fE G+: http://bit.ly/1CtsNjJ Instagram: http://bit.ly/1psm1QZ Tumblr: http://bit.ly/1CtsLbH

Saturday, 2 February 2019

Arlington Arts & Crafts | Make Way for the Family Room: 3803


Tommy and Kevin replace a 100-year-old wooden beam with a new steel beam to provide support for the new addition. Norm visits local examples of Arts & Crafts style houses with historian Richard Duffy. The old oil tank gets drained and removed by a specialist. Digging for the new foundation begins and the old concrete pieces from the patio and foundation get transported to a recycling center. Tommy shows Kevin what happens to the material once it is there and how it is used for future construction material. This Old House is the No. 1 multimedia home enthusiast brand, offering trusted information and expert advice through award-winning television and video.

Friday, 1 February 2019

Arlington Arts & Crafts | A New Look, Inside and Out: 3802


The design process kicks off with a meeting at interior designer Jill Goldberg’s shop in Boston’s South End. Homeowner Emily sorts through colors and wallpaper ideas for the living room to brighten up the house. Back at the house the old plaster walls are carefully demolished. Landscape architect Kim Turner presents her first landscape plan to Nick and Emily outside, and Roger brings in a certified arborist to begin removing the old Silver Maple. Kevin and Tommy bring down the exterior back wall to make room for the new addition. This Old House is the No. 1 multimedia home enthusiast brand, offering trusted information and expert advice through award-winning television and video.

How to Read the Sevens | Tarot Cards


Unlock the mysteries of Tarot: The Complete Guide to the Tarot: http://amzn.to/1Pj0Div The Tarot Bible: The Definitive Guide to the Cards: http://amzn.to/1LlxTzz Chakra Wisdom Oracle Cards: http://amzn.to/1hrj3zE The Essential Tarot Kit: Book and Card Set: http://amzn.to/1ZdkUu5 The Rider Tarot Deck Cards: http://amzn.to/1OmCOXQ Watch more How to Read Tarot Cards videos: http://bit.ly/2TpLGBt Hello, I’m Ellen Goldberg and I welcome to this taro moment from the School of Oracle. In this segment, we’re gonna look at the sevens of the four suits of the Minor Arcana. The sevens belong to Netzach, the sphere that is the lowest sephira on the pillar, the masculine pillar on the right hand pillar on the Tree of Life. This means we’re coming very close to manifestation. The sevens, the eights, the nines all become less stable especially the sevens and the eights because we’re way down below far from the high spiritual quality of say some of those upper cards. Not only that. Sephira number seven is ruled by Venus and is the desire nature and these cards will show something about how we desire what we want and how we use the energy of that force. The first that we look at the second of Wands is called the The Lord of Valour. It’s astrological attribution is Mars and Leo. Now this is energy. A firey planet in a fiery noble sign and there is courage here. The Lord of Valour, valour is an old word really having to do with deeds of the heart, courage of the heart, but he is on the slippery slope. Notice that there is something unusual about this card because he is the only person in the entire deck who is wearing two different shoes. How would you feel on such a rocky slope one may even be marshy and have some watery, spongy ground, and holding of six others?  You can’t do this alone.This is about harnessing the will not my will, but thine he is saying. This is letting the higher self or the divine fight your battles for you. How else can you knock out six to one? Although it may be that that he’s not fighting he is so much as being vigilant and more interpretation of this card is that he is holding down the lower desire nature through his vigilance because this is a sephira that deals with desire. Seven is a number of victory and the name Netzach means victory and eternity and the vigilance to hold down the lower forces within the self is one of the greatest victories we can have. On the higher polarity, this fight is yours to win. You are harnessing the higher forces and you are holding them often doing very well. On the lower polarity that slippery slope is getting to you and maybe you’re not doing very well at all. And the lower force comes and overwhelms you. The next card we look at is the Seven of Cups. Very interesting card is called Illusionary Success and its astrological attribution is Venus and the sign of Scorpio. Venus does not do very well in a sign that’s ruled by Mars or/and Pluto called for since Pluto is discovered. But Venus in Scorpio the desire nature is strong. Look at this person in this card he sees so many things. What does he want? Will this make him happy? Will that make him happy? And yet success is illusionary. There isno pinnacle of success. In fact the word climax actually means ladder.  It’s just a succession of experiences to think that one thing in the attaining of it will do is actually an illusion. And yet on the higher polarity, there are so many things that one wants. The desire nature calls to you. Even on the higher polarity there is so many things to determine what would really make one happy.And the lower polarity is more like quicksand and you’re being dragged under. There’seduction, there’s desire, and addiction of all kinds then it’s going to things that you think that might make you happy that are actually really harmful. The Seven of Swords is called the Lord of Unstable Effort and its astrological attribution is the moon in Aquarius. The moon is a feelingful planet. It represents our emotions and our unconscious and Aquarius the wonderful sign is not really suited for the moon because it’s intellectual. So here, there’s something wrong with the feelingful nature and perhaps the mind of overcoming the feelings and what is really right for the person. We see someone perhaps sneaking away. If you’ll look carefully in the background you’ll see that all the other people really indicated very lightly in back or having a meeting and while no one is noticing someone is slipping away with many of the swords. Here the efforts are not stable. Perhaps there’s going to be problems due to this instability. There’s wavering, uncommitment, maybe there’s a cold feeling from nature. Maybe someone is using the me arm because the

The Science of Transparency and Refraction | HTME: Minisode


I've spent a great amount of time trying to make clear glass, but what exactly makes it clear and useful for optics? Subscribe for free to hear the full episode, and get future episodes on Apple Podcasts: http://bit.ly/SimplyComplex Google: http://bit.ly/SimplyComplexGoogle You can also find it on our blog: http://bit.ly/2RBKn4M || In This Video || Our Camera Gear: - GH4: https://goo.gl/Kpgf9D - FS5: https://goo.gl/aPd428 - Dracast Light Panels: https://goo.gl/agbBSU - GoPro Hero 5: https://goo.gl/nDbjBk - Karma Drone: https://goo.gl/F16GWj || SUBSCRIBE || YouTube Channel: http://bit.ly/1OmesgS || SUPPORT || Patreon - http://bit.ly/1RzRaSL Spreadshirt - http://bit.ly/1OX2KHI Special Thanks to our Patrons at $15 per month or higher: Stian Andreassen, Daniel Laux, Liz Roth, Antonio Rios-Ochoa, Jenny Wolf-Matte, Quintin, Tim Reiche, Mats Nydesjö, Dylan Rich, Jason Lewis, Susan M. George, Stephen C Strausbaugh, Jason Kaczmarsky, Avinash Rajaraman, Andrew Nichols, Patrick Davis, Tyler Greeson, Remi_Scarlet, Steven Ingles, Brett Moran, Skylar MacDonald, Michael Sklaroff || SOCIAL || Facebook: http://ow.ly/X4rJC Twitter: http://ow.ly/X4rS3 (@HTMeverything) Instagram: http://ow.ly/X4rXs || SERIES || Sandwich - http://bit.ly/1ZVGNRn Suit - http://bit.ly/1NsQri8 Bottle - http://bit.ly/1QlTU6C Thanksgiving Dinner - http://bit.ly/1UjLa1R Root Beer Float - http://bit.ly/1OGfphU Book - http://bit.ly/1SF23Gx Chocolate Bar - http://bit.ly/2085HIs Coffee - http://bit.ly/2jllv0I Eyeglasses - http://bit.ly/2jlispn Microscope and Telescope: http://bit.ly/2nQCRn7 How To Brew Everything: http://bit.ly/2kJb47E Meet The Makers - http://bit.ly/23ldFlS || ABOUT || Today, getting what you need is as easy as a trip to the store. From food to clothing, energy, medicine, and so much more, Andy George will discover what it takes to make everything from scratch. His mission is to understand the complex processes of manufacturing that is often taken for granted and do it all himself. Each week he’s traveling the world to bypass the modern supply chain in order to harvest raw materials straight from the source. Along the way, he’s answering the questions you never thought to ask. Music by the talented Taylor Lewin http://taylorlewin.com